rest assured your waste liability is safe with us
Clean Water Environmental LLC has held a RCRA Facility Part B permit to operate a hazardous waste Treatment Storage and Disposal Facility (TSDF) since 1995. EPA hazardous wastes, as defined in 40 CFR part 261 and OAC 3745-51, presently permitted for management at the facility are listed below. These permitted wastes are accepted for storage and transferred off-site for fuels blending, incineration or stabilization. Some transfers are “as is,” in container while others are bulked up for transport.
Acceptable Waste Codes:
D001, D004, D005, D006, D007, D008, D009, D011, D018, D019, D021, D022, D023, D024, D025, D026, D027, D028, D029, D034, D035, D036, D038, D039, D040, D043;
F001, F002, F003, F004, F005, F037, F038;
K048, K049, K050, K051, K087;
U002, U019, U031, U052, U056, U057, U070, U071, U072, U080, U112, U117, U121, U140, U154, U159, U161, U171, U196, U210, U211, U220, U226, U227, U228, U239.
Waste Acceptance and Processing Criteria
- Incompatible wastes, PCBs, pesticides, explosive, corrosive or reactive wastes are not accepted at this time.
- No waste is scheduled for pickup or shipment into the facility without prior analysis (pre-screening) as per our WAP.
- The characteristics of the waste must be among those that the facility is permitted to accept.
- No hazardous waste shipment will be accepted at the facility unless the shipment is accompanied by a hazardous waste manifest which meets the requirement of 40 CFR Part 262.
Liquid and solid organic wastes are transferred off-site for processing into energy-efficient, high-Btu combustible fuels for energy recovery. This process provides alternative fuel for cement kiln operations and meets strict federal, state and cement kiln specifications.